500KW Water Cooled Natural Gas Powered Generators with Automatic
Victory gas engine is designed and developed through the
cooperation between world famous engine brand and Victory. Based on
Durable engine body, the gas engine life span reaches 30 year.
Feul type: Natural Gas/Biogas
F 50HZ 1500RPM R ti lt Frequency 50HZ, 1500RPM, Rating voltage
380V/220V, 400V/230V, 415V/240V
Frequency 60HZ, 1800RPM, Rating voltage 208V/120V, 220V/127V,
Power Factor 0.8(lagging)
Protection Standard: IP23
Model of Connection: 3 phase 4 lines
Insulation Grade: H
Frequency Fluctuation Ratio (%): ≤ 1
Transient state frequency deviation(%):(advertised power ) +10～-7
Frequency Recovery Time(S): ≤ 3
Voltage Recovery Time(S): ≤4
Waveform Distortion(%): ≤5
Voltage Stablilized Regulation: ≤±1.5%
Voltage Instantaneous Regulation: ≤±20%
Engine type: Four strok, electronic-control spark plug ignition,
water-cooling, premix proper ratio of air and gas before combustion
Cooling Mode: Radiator fan cooling for closed-type cooling mode, or
heat exchanger water cooling for cogeneration unit
Oil Recommended: API Service grade CD or Higher SAE 15W-40CF4
Idling Speed: 700rpm
Genset Running Condition:
Acceptable working conditions:
Ambient temperature : -10℃～+40℃ (antifreeze or hot water needed for
Normal working conditions:
Genset can run at rated power on the conditions: Atmospheric
Pressure: 100kPa, Ambient Temp: 20℃, Relative Humidity: 30%.
Fuel Gas Quality Requirement:
Appicable gas : Natural gas, Biogas, LPG, Coal-bed Gas
Gas Temperature ≤40°C
Acceptable gas engine pressure: 2~10kPa
CH4 volume content ≥30%
Total content of C2, C3, C4 content ≤20%, Genset output power will
decrese as the Cx content increase
Gas heat value ≥23MJ/Nm3. Genset output power will decrease as the
gas heat value decrease
H2S content ≤ 200mg/Nm3
NH3 content ≤20mg/Nm3
Impurities content ≤mg/Nm3, size ≤ 5μm
Water content ≤40g/Nm3, no free water
Standard scope of supply
1. Brand new gas engine with necessary parts.
2. Brand new 100% true brand and 100% copper brushless France Leroy
3. Control Panel system
4. Rating: 3 phases 4 lines, 50Hz or 60 Hz, 1500rpm or 1800rpm,
0.8PF, IP22-23, Insulation class: H.
5. Radiator for 50℃ ambient temperature.
6. Air circuit breaker (For the protecting purpose of overload,
over current, etc).
7. Inside muffler with flanged flexible connection.
8. Rubber anti-vibration pad between engine, alternator, control
panel and base frame.
9. Emergency stop mounted.
10. Gas supply system, including Ball Valve, Fire Extinguisher and
Gas Pressure Regulating Valve, etc.
Automatic genset control panel Model: Deepsea 7320
1. Control module cored with microprocessor
2. Program controlled generating set startup/shut down, LCD
Indicator with automatic start and stop.
3. Real time display of operating state and parameters of
generating set: voltage, current, frequency, speed, power factor,
battery voltage, oil pressure, working counter indicator
4. Charge failure, Battery low, Low pressure, High temperature,
Overspend, Under speed, High voltage, Low voltage, Over current,
Standby input warning.
5.Phenomenon alarm and state graphic signs offer a quick
information display of the generating set
6.Complete protection system: Fail to start, Fail to stop,
Emergency stop, Low oil pressure, High temperature, Over speed,
Under speed, High voltage, Low voltage,
Over current, Standby output alarm and stop protection.
7.Emergency switch with indicator lamp.
8.Programmable standard input and output interface, expandable for
Automatic genset control panel Model: ComAp IGNT for 150KW~500KW
•Gen-set controller for single or multiple generating sets
operating in standby or parallel modes
•Support of engines with ECU (Electronic Control Unit)
•Many communication options – easy remote supervising and servicing
•Gen-set performance log for easy problem tracing
•Automatic synchronizing and power control (via speed governor or
•AMF function, Baseload, Import / Export, Peak shaving, Voltage and
PF control (AVR)
•Generator measurement, Mains measurement
•Inputs and outputs configurable for various customer needs
•Event-based history (up to 500 records) with customer-selectable
list of stored values; RTC; statistic values
•Integrated PLC programmable functions
•Integrated fixed and configurable protections
1. Standard accessories, anti-vibration pad, exhaust pipe,
maintenance tools kit, filters
2. Maintenance Operating manual, Quality certificate, Gen-sets
ex-factory test report
1. ATS (Automatic Transfer Switch System) 6. Spare parts for
overhaul(All the engine and alternator parts available.)
2. Synchronizing parallel cabinet 7. CH4 leaking alarm device
3. Battery Charger 8. Solenoid valve, gas filter,
4. Water heater 9. Soundproof canopy
5. Oil heater(For below -40℃~-5℃ environment.) 10. Batteries